FreezerCell™

Description

The FreezerCell™ can be used with a variety of cell types, including stem cells, primary cells, cell lines and yeast. The FreezerCell™ doesn’t require any additives, all you need to do is place the FreezerCell™ into an ultra-low freezer, and the cooling will begin at -1℃ per minute. It is a very good device for all protocols of cell preservation. This product is symmetrically designed with a combination of foam and alloys with no additives or emission characteristics. These products are environmentally friendly. No Need to replace any parts, and will serve you for years. The FreezerCell™ is easy to use, just insert your samples, and place in an ultra-low freezer and your done. The FreezerCell™ can greatly improve your handling and efficiency, at the same time of promoting a greater survival rate of cells after thawing. Your samples are safe and worry free.

Product Features

Easy to use

• No need to add any liquid or pre-cooling, simply put your samples directly into the FreezerCell™, and keep all your samples in a -80℃ low temperature environment.
• Easy open lid, and you can hold the FreezerCell™ directly from the -80℃ freezer without any concern of frostbite to your fingers.
• Transfer the samples conveniently, you can remove the whole box or an individual sample at any time.

Low cost

• No maintenance costs, no need to replace anything. Once you purchase the FreezerCell™, it will serve you for years to come.
• Reuse the FreezerCell™ over and over, 5-minute turnaround time.
• The FreezerCell™ foot print is minimal, and won’t use up a lot of freezer space.

Higher cell survival rate

• Cooling rate consistency is very good, freeze an individual experimental, or a full load. The cooling rate on each sample is the same every time.

Usage

Simply put the samples to be frozen into FreezerCell™, and apply the lid. The FreezerCell™ must be placed in a -80℃ environment for at least 3 hours, during the cooling period, do not opened during the cooling process. A􀅌er the cooling processing is complete, the sample can be removed and transferred to liquid nitrogen tank for long term storage. If you need to reuse the FreezerCell™ quickly, simply open the lid and remove the tray, let them both return to room temperature, then you are ready to use again.